1、First trial from the machine after texturing is to verify the feasibility of mould design.
2、It is complicate to differentiate a particular problem from the first trial.
3、Textured appearance can be solved only after all other issue has been determined.
| Part Appearance | Analysis | To Be Corrected |
| Dragging |
1、Draught Angle 2、Designed Angle 3、Injecting Pin Issue 4、Polishing Issue |
1、2，Increase draught angle 3、Core(side wall)to be textured 4、Re-polishing |
| Gloss Level |
1、Mould Temperature 2、Material Temperature 3、Air Passage |
1、2，Adjust temperature setting 3、Improve air passage slot |
4、Texture Appearance
(1)、Scratching due to fitting from the core.
(2)、Temperature differences due to wall thickness.
(3)、Assembly issue from sliders.
(4)、Hardness inconsistence due to welding.
(5)、Tool material issue.
(6)、Injecting point issue.
(7)、Radius and comering issue important safety awareness.
All texture reparing from the machine must be locked and tagged.
Mobile website
Wechat QR code
CH
EN