"Pursue Innovation Beyond Competitiveness" -The management motto of M-Tex.

Our Objective: To pursue perfection in texturing and to be the international standard in texturing technology.

“Originality hails from nature, we aim to return to nature” Innovation and creatixity is the key to M-Tex's pattern development department.

Our service not only comprises of texturing but also includes texture development, texture repair, mould polishing and welding etc.

“Reasonable Prices, Short Lead Time and Great Service” , all at M-Tex.

M-Tex management and its staff thank you for your queries and orders. We look forward to your continual support.

_{Tooling and Texturing}

A.The rule of thumb: every 13 micron of depth required one degree of draught.

B.Parting line:0.2 to1mm of un-textured line along the parting line.

C.Depth of texture must be increased by 10% if the production involve heat treatment process.

_{Mold surface requirements}

1、No processing marks; no solder joints.

2、No polishing marks; no fire pattern.

3、The surface smoothness of the mold.

4、The surface hardness of the mold.

5、No material line.

6、No structural design issues.

_{Factors of injection}

1、Plastic material.

2、Pressure from core and cavity.

3、Mould temperature.

4、Other addictive from plastic material.

5、Gloss level.

6、Cycle time.

7、Wall thickness from the parts.

8、Injecting Point.

9、Material flow mark .

10、Design of air passage.

11、Design of draught angle.

12、Patter requirement.

_{Pre-texture awareness}

1、Surface finishing (600-800)

2、Welding mark must be treated.

3、Shut-off area to be marked from the machine.

4、Flashing mark to be awared.

5、Draught angle.

6、Mold material.